(4) Double patterning
The double patterning is divided into four parts, leading with wafer requirements and then two sets of lithographic requirements (Generic Pitch Splitting - Double Patterning Requirements Driven by MPU metal Half-Pitch and Generic Spacer Patterning Requirements - Driven by Flash). The lithography requirements are different for each process; the requirements for pitch splitti
○ PECVD
∙ What is PECVD?
⇒ Radio frequency(RF) is used to induce plasma in the deposition gas.
⇒ This results in a higher deposition rate at relatively low temperatures.
⇒ With the plasma enhanced CVD process is the deposition at temperature around 300℃ allows.
⇒ The temperature will be through encouragement of a plasma with high frequency electric fields triggered.
설계형상의 제품이 제조
⑶ 특수 주조법
① 금형 주조(다이케스팅) : 압력을 가해 제품생산(알루미늄, 동합금)
- 장점 : 정밀, 표면이 아름다움, 조직치밀, 대량/고속생산 얇고 복잡한 형상 가공
- 단점 : 설치가 복잡하고 용융점 높은 금속에 부적당
※예 : 전기기구, 사진기, 타자기, 계산기 부품
patterning is performed in same time.
Metal mask is shifting, and then red, green, blue organic layers are deposited.
This method has a limitation of resolution, because FMM cannot be small enough
to make high resolution display.
Source is located below, thus substrate can droop. This causes bad pixel problem
Organic material can be melted
easily organic solutions
Thus, organic
for
achieving GaN-based LED with better efficiency.
Desired : Low contact resistance to p-GaN and High transmittance.
① Metal layer
☞ Low Contact Resistance, but Low transmittance
② Graphene layer☞ Excellent Transmittance, but High contact resistance
③ Metal/Graphene layer to p-GaN☞ Improved contact resistance, but not quite high transmittance.
Ⅰ. 개요
주물산업은 기계, 전기전자산업, 자동차산업, 항공기산업의 핵심부품을 제조공급하는 면에 서 관련업계는 물론 정부차원의 지원이 요구된다. 주물산업의 지속적 발전을 위해서는 자금 지원의 강화를 통하여 업체의 전문화, 품질고급화, 생산성향상을 유도해야 한다. 이와 더불어 주물산업
In describing the answer to the question below, try to share your opinions on the basis of evidences such as articles and books. Also provide information of the evidence (author, title, journal name, etc.).
1. Explain what happens in terms of mechanical/chemical properties when making products using metal-based 3D additive manufacturing technology. (10 points)mechanical properties
전통적
Ⅰ. 서론
구조물의 안전도 및 내구성 향상을 위한 최적설계를 위하여 재료의 물리적, 기계적, 화학적 특성을 정확히 구하는 것이 매우 중요하다. 특히, 복합재료와 같이 방향성이 있는 재료의 경우에는 등방성 재료와는 달리, 각 방향에 대한 재료의 특성 값이 다르기 때문에 시험의 종류가 많고 정확
Ⅰ. 개요
재료들이 ‘슈퍼’라는 이름을 달기 위해 선택하는 가장 보편적인 방법은 합금이다. 현재 가장 많이 사용되는 합금은 철기 시대부터 사용되고 있는 철계 합금이다. 물론 지금의 철계 합금과 철기 시대의 합금을 비교한다면 겉은 비슷할지 모르지만 성질면에서는 엄청난 차이가 있다. 그리고